series amer120-caz up to 5a | ac-dc / dc-dc | led driver / converter www.aimtec.com tel: +1 514 620 2722 toll free: + 1 888 9 aimtec (924 6832) f 052.1e r3.d 1 of 10 north america only features: models single output model max output power (w) output voltage range (v) ? output current (a) input voltage (vac/hz) input voltage (vdc) mode of operation efficiency (%) amer120-50250caz 125 36-50 0-2.5 90-305/47-440 120-430 constant current 91 constant voltage 90 AMER120-36340CAZ 122.4 24-36 0-3.4 90-305/47-440 120-430 constant current 90 constant voltage 89 amer120-24500caz 120 12-24 0-5 90-305/47-440 120-430 constant current 89 constant voltage 87 add suffix ?-f? no dimming option exceeding the maximum output power will permanently damage the converter the dimming feature is not supported when units are used in consta nt voltage mode only, aimtec suggests to order ?-f? no dimmin g option in this case. in constant current mode output current is maximum shown, in constant voltage mode output voltage is the maximum shown. note: all specifications in this datasheet are measured at an ambient temperature of 25c, humidity<75%, nominal input voltage and at rated output load unless otherwise specified. input specifications parameters conditions typical maximum units inrush current <2ms 115vac 45 a 230vac 60 leakage current 115vac 0.5 ma 230vac 0.75 ac current 115vac 1.8 a 230vac 0.7 power factor 115vac 0.98 240vac 0.94 external fuse 250v/3a start up time 900 ms surge voltage 2sec 440 v output specifications parameters conditions typical maximum units current accuracy 3 % line regulation ll-hl 1 % load regulation 0-100% load 3 % ripple & noise tested with 0.1f (m/c) or (c/c) and 47f (e/c) parallel capacitors at the end. ? constant current or constant voltage led driver or converter ? ? over current protection ? input range 90-305vac/47-440hz ? ? high efficiency up to 91% ? ? 115vac operating temperature -50 to 85c ? 230vac operating temperature -55 to 85c ? dimming via analog / 0-10v dimming ?
series amer120-caz up to 5a | ac-dc / dc-dc | led driver / converter www.aimtec.com tel: +1 514 620 2722 toll free: + 1 888 9 aimtec (924 6832) f 052.1e r3.d 2 of 10 north america only isolation specifications parameters conditions typical rated units tested i/p-o/p voltage 3sec 3750 vac tested i/p-fg voltage 3sec 1880 vac tested o/p-fg voltage 3sec 500 vac isolation resistance 500vdc >1000 m ? isolation capacitance 1000 pf general specifications parameters conditions typical maximum units switching frequency 100 khz over current protection 110% of iout over voltage protection 110% of vout short circuit protection continuous short circuit restart auto recovery over temperature protection >105c operating temperature (see derating table) (115vac) -50 to +85 o c (230vac) -55 to +85 o c cold start-up time -55c 30 sec maximum case temperature 100 o c storage temperature -55 to +95 o c temperature coefficient 0.02 % / o c cooling free air convection humidity 95 % rh case material aluminum potting epoxy (ip68 rated) wires ul1015 18awg input & 14awg output *20cm weight 750 g dimensions (l x h x w) 7.13 x 2.32 x 1.85 inches 181.00 x 59.00 x 47.00 mm mtbf >400,000 hrs (mil-hdbk-217f at +25c) safety specifications parameters agency approvals ce standards en55022, class b, en60529(ip68), en61347-1, en61347-2-13 note : also designed to meet culus, ul8750, ul60950-1
series amer120-caz up to 5a | ac-dc / dc-dc | led driver / converter www.aimtec.com tel: +1 514 620 2722 toll free: + 1 888 9 aimtec (924 6832) f 052.1e r3.d 3 of 10 north america only dimensions analog (resistive) dimming application circuit model number maximum pot value (k ? ) amer120-50250caz 18.22 AMER120-36340CAZ 22.10 amer120-24500caz 34.31
series amer120-caz up to 5a | ac-dc / dc-dc | led driver / converter www.aimtec.com tel: +1 514 620 2722 toll free: + 1 888 9 aimtec (924 6832) f 052.1e r3.d 4 of 10 north america only 0-10v dimming application circuit derating -55 -30 0204060 80 100 100 80 60 40 20 0 safe operating area output power (%) ambient temperature o c free air convection 50c 85c cv ? mode cc ? mode 50c 80c 230 vac
series amer120-caz up to 5a | ac-dc / dc-dc | led driver / converter www.aimtec.com tel: +1 514 620 2722 toll free: + 1 888 9 aimtec (924 6832) f 052.1e r3.d 5 of 10 north america only efficiency vs. input voltage and output current (cc load) amer120-50250caz AMER120-36340CAZ
series amer120-caz up to 5a | ac-dc / dc-dc | led driver / converter www.aimtec.com tel: +1 514 620 2722 toll free: + 1 888 9 aimtec (924 6832) f 052.1e r3.d 6 of 10 north america only efficiency vs. input voltage and output current (cc load) continued amer120-24500caz pfc value vs. output load current (cc load) amer120-50250caz
series amer120-caz up to 5a | ac-dc / dc-dc | led driver / converter www.aimtec.com tel: +1 514 620 2722 toll free: + 1 888 9 aimtec (924 6832) f 052.1e r3.d 7 of 10 north america only pfc value vs. output load current (cc load) AMER120-36340CAZ amer120-24500caz
series amer120-caz up to 5a | ac-dc / dc-dc | led driver / converter www.aimtec.com tel: +1 514 620 2722 toll free: + 1 888 9 aimtec (924 6832) f 052.1e r3.d 8 of 10 north america only constant current mode vs. constant voltage mode amer120-50250caz AMER120-36340CAZ
series amer120-caz up to 5a | ac-dc / dc-dc | led driver / converter www.aimtec.com tel: +1 514 620 2722 toll free: + 1 888 9 aimtec (924 6832) f 052.1e r3.d 9 of 10 north america only constant current mode vs. constant voltage mode amer120-24500caz output current vs. radj amer120-50250caz
series amer120-caz up to 5a | ac-dc / dc-dc | led driver / converter www.aimtec.com tel: +1 514 620 2722 toll free: + 1 888 9 aimtec (924 6832) f 052.1e r3.d 10 of 10 north america only output current vs. radj AMER120-36340CAZ amer120-24500caz note: 1. datasheets are updated as needed and as such, specifications ar e subject to change without notic e. once printed or downloaded , datasheets are no longer controlled by aimtec; refer to www.aimtec.com for the most current product specifications. 2. product labels shown, including safety agency cert ifications on labels, may vary based on the date manufactured. 3. mechanical drawings and specifications are for reference only. 4. all specifications are measured at an am bient temperature of 25c, humidity<75%, nominal input voltage and at rated output load unless otherwise specifie d. 5. aimtec may not have conducted destructive testing or chemical analysis on all internal components and chemicals at the time of publishing this document. cas numbers and other limited information are considered proprietary an d may not be available for release. 6. this product is not designed for use in critical life support systems, equipment used in hazardous environments, nuclear control sys tems or other such applications which necessitate specific safety and regulatory standards ot her the ones listed in this datasheet. 7. warranty is in accordance with aimtec?s st andard terms of sale available at www.aimtec.com.
|
